____cause of Blue Screen......???

1. IRQL_NOT_LESS_OR_EQUAL (0X0000000A)
This is main problem from BsOD, because on general problem this issue is show up, this error show up when driver that already install doesn't meet any requirment or other word it doesn't fix with your computer.

list of cause:
- Driver problem, could be not suitable or appropriate
- VGA card Problem, this happen when you just overclock your VGA over the limit or you just change your VGA with the new one and you haven't install the driver yet, after you unistall the older driver of your VGA
- Sound Card, this include on configuration or bug on sound card driver.

2. NTFS_FILE_SYSTEM atau FAT_FILE_SYSTEM (0X00000024) atau (0X00000023)
Walla......., on this point you got a clue, that say where's damage located, which is on partisi or file system, but NOT on the Harddisk, we can use chkdsk to analyze the problem or you can check also SATA or PATA cabel.

3. UNEXPECTED_KERNEL_MODE_TRAP (0X0000007F)
If you got this message error, this cause by:
- Hardware overclock that over the limit,....Too hot
- Over heat of Computer component
- BIOS corrupt
- Memory or CPU that physical defect.

4. DATA_BUS_ERROR
This is cause when there is a change a memory or memory slot on motherboard "DAMAGE"

5. PAGE_FAULT_IN_NONPAGED_AREA
This error you get when there's a damage on Hardware, include Main Memory, Video card memory or Memory on processor [L2 Cache]

6. INACCESSIBLE_BOOT_DEVICE
This error you get when there is an mistake on Harddisk jumper configuration, virus boot sector, wrong driver on IDE Controller or there's mistake on chipset driver

7. VIDEO_DRIVER_INIT_FAILURE
This happen when installation driver of video card not succesfull, restart when prossesing, or even mistake when driver installation.

8. BAD_POOL_CALLER
this message appear when there's mistake or driver not competible with, this happen during installation or windows upgrade, or not from a new installation.

9. PEN_LIST_CORRUPT
You got this message that mean your Memory [RAM] broken or Damage

10. MACHINE_CHECK_EXCEPTION
Cause by CPU malfunction or agresif when overclock hardware, also power supply malfunction.

for Indonesia Language goes [here]